Galaxy A3 A300

October 13, 2016
Galaxy-A3-downgrade-to-Lollipop.jpg

6min012

As you might already know, Marshmallow update is rolling out for Galaxy A3 devices. However, some models become laggy and their batteries started to drain fast. The only solution to fix it, is to get Lollipop OS back into your device.
The tutorial given below will downgrade Galaxy A3 to the stable Lollipop 5.1.1 OS and hopefully should bring back the smile on your face.

Warning: This tutorial is only for Galaxy A3 A310F model.
Update process will erase device internal storage, so it’s strongly recommended to backup your data to device SD memory card or PC before starting this tutorial.

Prerequisites:

• The device should have at least 60% charge left on the battery.
• If you have Samsung Kies program in PC, Kies should be completely turned off to not disturb all the process.
• USB drivers must be installed on PC (if Kies are in PC then drivers are already installed).
• USB Debugging must be enabled on the device. To enable it go to Settings/About phone and keep taping on Build number until you see Developer mode has been turned on. After that go to Settings/Developer Options then check USB Debugging.

Tutorial:

  1. Download Odin3 v3.10.7 to PC and extract it.
  2. Download Lollipop 5.1.1 to PC and extract it so you’ll get .tar.md5 file.
  3. Turn off Galaxy A3 and boot into Download mode by pressing and holding down the Volume Down, Home and Power buttons together. When a warning screen is displayed release all buttons and press the Volume Up button to enter Download mode. galaxy-a3-download-mode
  4. Run Odin3-v3.10.7.exe as an Administrator and then connect Galaxy A3 to the PC via USB. Message showing Added!! will appear in Odin’s message box, if not, try another USB port. If the issue persists, try reinstalling the USB driver.
  5. Click on the AP button and select a .tar.md5 file, which was downloaded in step 2. In Odin, make sure that the Auto Reboot and F. Reset Time options are checked while Re-Partition must stay unchecked. For example: Odin3-set
  6. Click Start button in Odin to begin the process.
  7. After the process is complete, Galaxy A3 will restart and a PASS message with green background will appear in the left box at the top of Odin. Odin3-PASS
  8. Turn off Odin and unplug USB cable from device.
  9. Galaxy A3 will restart. First startup can take up to 15 minutes, so be patient.
    That’s it!

Congratulations on successfully downgrading Galaxy A3 to Lollipop 5.1.1 official ROM!


February 4, 2016
Galaxy-A3-root.jpg

6min00

This root method works only on Samsung Galaxy A3 mobile running KitKat or Lollipop.
Compatible Galaxy A3 models are listed below:

  • A3000
  • A3009
  • A300F
  • A300H
  • A300M
  • A300YZ

Before you start, please check if your A3 model is supported by going to Settings/About Phone

Warning: Rooting voids device’s warranty. Users should proceed at their own risk.
Please note that warranty can be restored by flashing back any of the supported stock ROMs.
Root will not erase device internal storage or SD memory card, but it’s still strongly recommended to back up all data before getting started.

Prerequisites:
• The device should have at least 60% charge left on the battery.
• If you have Samsung Kies program in PC, Kies should be completely turned off to not disturb all the process.
• USB drivers must be installed on PC (if Kies are in PC then drivers are already installed).
• USB Debugging and OEM Unlocking must be enabled on the device. To enable it go to Settings/About phone and keep taping on Build number until you see Developer mode has been turned on. After that go to Settings/Developer Options then check USB Debugging and OEM Unlocking (this enables bootloader to be unlocked).

Tutorial:
1. Download to PC Odin3 v3.10.7 and extract it.
2. Download and extract CF Auto Root file depending on your device model:
A3000
A3009
A300F
A300H
A300M
A300YZ

3. Turn off Galaxy A3 and boot in to Download mode by pressing and holding down the Volume Down, Home and Power buttons together. When a warning screen is displayed release all buttons and press the Volume Up button to enter Download mode. Galaxy S5 download
4. Run Odin3-v3.10.7.exe as an Administrator and then connect Galaxy A3 to the PC via USB cable. Message showing Added!! will appear in Odin’s message box, if not, try another USB port. If the issue persists, try reinstalling the USB driver.
5. Click on the AP button and select the CF-Auto-Root file (a .tar.md5 file), which was extracted in step 2.
6. In Odin, make sure that the Auto Reboot and F. Reset Time options are checked while Re-Partition must stay unchecked. Odin3-set
6.1 Click Start button in Odin to begin the process.
6.2. After the process is complete, Galaxy A3 will restart and a PASS message with green background will appear in the left box at the top of Odin. Odin3-PASS
7. Turn off Odin and unplug USB cable from device.
8. SuperSU app will be seen on the screen.

Congratulations for successfully rooting Galaxy A3!



About us

4mobiles.net was developed with passion and perfection to create one better place for every smartphone lover to stay.
Here you will find many great apps to make your phone even better, tutorials helping to fix your device or some of you just simply enjoy time spent here commenting and sharing valuable info with other fans.


CONTACT US

CALL US ANYTIME